Coolpad

HOW TO FLASH COOLPAD NOTE 5 | DEAD BOOT REPAIR |

COOLPAD NOTE 5 DEAD BOOT REPAIR DONE, 100% TESTED FILE

We have 2 methods to flash coolpad devices,

  1. USING YGDP TOOL VIA FASTBOOT
  2. QUALCOMME FLASH TOOL VIA EDL MODE
the 1rst method is the official one and this method can only fix all software related issues

 

The Second method is using for getting fastboot mode,and this method will use for fully dead devices

 

IF YOUR PHONE IS ABLE TO ACCESS FASTBOOT MODE,THEN USE 1 ST METHOD

IF YOUR PHONE IS FULLY DEAD,AND GETTING QUALCOMME DIAGNOSTIC DRIVER,LED BLINKS,VIBRATE ONLY,THEN USE 2 ND METHOD.AND AFTER GETTING FASTBOOT MODE,FLASH THE PHONE USING 1ST METHOD

METHOD 1

USING YGDP TOOL

  1. DOWNLOAD OFFICIAL COOLPAD CPB FIRMWARE
  2. DOWNLOAD YGDP TOOL
  3. DOWNLOAD DRIVER
  4. CONNECT YOUR PHONE IN FASTBOOT MODE BY PRESSING VOLUME + AND – SIMULTANEOUSLY
  5. AND FLASH IT WITH YGDP TOOL

HOW TO USE YGDP TOOL

METHOD 2

USING QUALCOMME FLASH TOOL

  1. DOWNLOAD MODIFIED FIRMWARE
  2. DOWNLOAD QUALCOMME FLASH TOOL
  3. DOWNLOAD DRIVER
  4. CONNECT YOUR PHONE IN EDL
  5. REMOVE BACK COVER OF YOUR PHONE
  6. FINED EDL PINOUTS
  7. REMOVE BATTERY
  8. SHORT PINOUTS
  9. CONNECT CABLE
  10. AND FLASH IT WITH TOOL
  11. NOW YOUR PHONE WIIL BE ABLE TO GET FASTBOOT MODE
  12. USE 1ST METHOD TO FLASH THE PHONE COMPLETELY
  13. DONE

 

Leave a Reply

Please rate*

Your email address will not be published. Required fields are marked *

Close

Adblock Detected

Please consider supporting us by disabling your ad blocker